Maintenance of IWANA RETRO CLICK&PAWL reels

How to disassemble your reel

1.Use a suitable screwdriver to remove four screws on the side of the nameplate.

2.Use a suitable screwdriver to unscrew the S-handle.


Cleaning and maintenance

1.Remove dust and rust from the inside of the reel and keep the reel clean and dry.

2.Apply a drop of oil on three parts pointed by green arrows.

3.Apply a small amount of grease on three parts pointed by yellow arrows.

Reminder of assembling the reel

Apply sufficient threadlocker onto the screw to ensure the S-handle is tightly screwed . (Permatex Threadlocker Red/Rouge High Strength recommended)